Optical Vision Video Vms Measuring Instrument For Flexible Circuit Board Inspection
Product Introduction
AT series Automatic Vision Measuring System is an effective length measuring machine constructed by the technology of precision machinery, optic, electronic etc..
Features in the VMM control system of AR- 3 are as follows:
- Special purpose-built processor (ASP) to significantly reduce the number of electronic circuits and parts to improve reliability.
- Single circuit board structure, in order to greatly reduce the number of wiring to improve reliability.
- High speed, energy saving and high precision fully closed-loop AC servo control system, which can provide positioning accuracy up to 1 μm, in order to minimize the possible factors affecting measurement repeatability.
- Built in 21 orders of high precision geometric stereo spatial error compensation.
Technical Specification
| Model | AT-3020 | AT-4030 |
| Measuring Travel(mm) | 300 x 200 x 200 | 400 x 300 x 250 |
| Dimension (mm) | 1200 x 720 x 1600 | 1250 x 900 x 1600 |
| Work Table Glass Size(mm) | 339 x 239 x 10 | 439 x 339 x 12 |
| Weight (kg) | 280 | 460 |
| Max Table Load(kg) | 30 | 30 |
| Measurement Accuracy (μm) | 1.5+L/200 |
| Repeatability | 2 μm |
| Magnification | Optical Magnification 0.7-4.5X, Image Magnification 20-125X |
| Axis Display Resolution | 0.00001mm (0.01μm) |
| Lighting System | Eight areas up light source with two laser positioning system |
| Operation | Automatic control by mouse, joystick or keyboard |
| Lens | Automatic Zoom, automatic focus optical coaxial lens |
| Vision System | High resolution SONY CMOS global shutter camera |
Product Features
- X , Y , Z axis of the Absolute Linear Scale is independent researched and developed, with a resolution up to 0.01 μm.
- F3 high precision closed loop auto zoom lens.
- The special designed motion controller of Vision measuring machine using Ethernet transmission, which is efficient and reliable system, can solve the disadvantage of unstable USB transmission.
- High-resolution SONY CMOS sensor of image processor to ensure the image is clear and without smearing.
- The up light source using eight areas partitioned independent control lighting system, and the light-emitting element using low- attenuation LED to extend working life.
- Independently developed multi-function 2D and 3D measurement software, the measurement results can be output to DXF, Word, Excel, PDF and other formats.
- Machine can run in 24 hours continue operation.
- 3 axis precision linear guide, precision drive system and CNC control system.
- Precision granite machine body with high accuracy and stability.
- New design for machine work table, in order to prevent pinching during operations
F3 high precision closed loop auto zoom lens
Features:
♦ 3 million pixels high resolution lens
♦ Fully closed-loop servo control eliminates gear transmission gap and greatly improves the repeatability of the machine.
♦ Adopt the high precision and resolution ring shaped grating ruler specially developed and designed by our company for F3 Lens for full closed-loop position feedback.
♦ F3 lens comes with a coaxial light source to solve the problem of insufficient illumination for deep hole measurement.
♦ Fully closed-loop servo position feedback for fully automatic focusing
21 Orders Volumetric Compensation
Easson Vision Measurement Machine used with AR series Network control System which is included 21 orders volumetric compensation, with Ultra high speed linear encoder reading and built-in EAD (absolute code decoder) allow AR series system to use our AS-80 high precision absolute scale, providing high accuracy and high resolution measurement.
2D Software Function
- Two points distance: Use left mouse key to select two points (one by one), program will form a line between the two points, length of this partial line is this two points' distance.
- Line middle point: Use left mouse key to select a line, program will calculate its middle point.
- Point-line distance: Use left mouse key to select a point and a line, program will form a new line automatically and its length is the point-line distance.
- Point-circle tangents: Use left mouse key to select a point and circle, program will get tangents from the point to the circle (If tangents exist).
- Two lines' intersection (inclination): Use left mouse key to select two lines, program will get inclination and intersection of the two lines.
- Angular bisector: Use left mouse key to select two lines, program will get angular bisector of the two lines. (Click different parts of the lines, results come out may differ).
